-14-
Fig. 13
ALWAYS REMEMBER
to flip down your key gauges before cutting a key. Failure to do so may damage the
key gauge and key gauge shaft with the cutter wheel.
PLEASE. . . DON’T FORGET
to turn off your key machine before removing a cut key and reloading another key
blank.
LOCK THE CARRIAGE BACK
(after cutting a key)
Push DOWN on the carriage’s large “teardrop” knob until the carriage “clicks” into the locked position.
SWITCH “ON” YOUR MACHINE
The power switch is located at the lower right, front of the machine. See figure 14.
Fig.14
To switch ON push the switch DOWN.
To switch OFF pull the switch UP.
1
2
.
CUTTER SHAFT LOCK
To remove the cutter you must lock the cutter and cutter shaft in position before using a wrench to
remove the cutter.
Power Switch
