![background image](http://html.mh-extra.com/html/ryobi/ros300/ros300_original-instructions-manual_1506306003.webp)
English
1
EN
FR
DE
ES
SPECIAL SAFETY RULES
2
Always wear safety goggles and a dust mask when
sanding, especially sanding overhead.
2
A suitable breathing respirator must be worn while
sanding lead paint, some woods and metal to avoid
breathing the harmful/toxic dust or air.
INTENDED USE
You may use this product for the purposes listed below:
2
Sanding on wood surfaces.
2
Removing rust from and sanding steel surfaces.
2
Sanding plastics.
MAINTENANCE
WARNING
The tool should never be connected to a power supply
when you are assembling parts, making adjustments,
cleaning, performing maintenance, or when the tool is
not in use. Disconnecting the tool will prevent accidental
starting that could cause serious injury.
WARNING
When servicing use only identical Ryobi replacement
parts. Use of any other parts may create a hazard or
cause product damage.
GENERAL
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
WARNING
Do not at any time let brake 7 uids, gasoline, petroleum-
based products, penetrating oils, etc. come in contact
with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
Electric tools used on 9
berglass material, wallboard,
spackling compounds, or plaster are subject to accelerated
wear and possible premature failure because the 9 berglass
chips and grindings are highly abrasive to bearings,
brushes, commutators, etc. Consequently, we do not
recommend using this tool for extended work on these
types of materials. However, if you do work with any of
these materials, it is extremely important to clean the tool
using compressed air.
WARNING
Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing
dust. If operation is dusty, also wear a dust mask.
LUBRICATION
All of the bearings in this tool are lubricated with a suf9 cient
amount of high grade lubricant for the life of the unit
under normal operating conditions. Therefore, no further
lubrication is required.
WARNING
Always remove sanding sheet from sander before
cleaning. Failure to do so could cause serious personal
injury.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging should be sorted for
environmental-friendly recycling.
SYMBOL
Safety Alert
V
Volts
Hz
Hertz
Alternating current
W
Watts
no
No-load speed
min;¹
Revolutions or reciprocations per minute
CE Conformity
Conformance to technical regulations
Pad size
Orbital diameter
Double insulation
Please read the instructions carefully before
starting the product.
Summary of Contents for ROS300
