![background image](http://html.mh-extra.com/html/ryobi/rm300e/rm300e_manual_1505227041.webp)
PRODUCT SPECIFICATIONS
Ride-On Mower
Model
RM300E
Weight
178 kg
Motor
48 V d.c.
No-load speed
3800/min
Cutting rated power
850 W
Drive rated power
1000 W
Height adjustments
35 mm to 115 mm
Wheel size
Front
13 x 5.00 - 6
Rear
16 x 6.50 - 8
Tyre air pressure
1.4 bar (140 kPa)
Cut size
76 cm
Turning radius
401 cm
Maximum speed
Forward
8.8 km/h
Reverse
4.0 km/h
Charger
OP48RM
Charger input
220-240 V a.c., 50/60 Hz
Charger output
20-60 V d.c., 7.5-8 A
Charge time
<12 h
Quick recharge (60%)
<6 h
Battery
6-EVF-50 (12 V, 50 Ah)
Battery type: Lead-acid battery
Dimensions
224 x 135.5 x 177.5 mm
Kit Details
4 x 6-EVF-50
Total weight
60 kg
Vibration level (in accordance with EN ISO 5395-1 and
EN ISO 5395-3)
Whole body vibration
1.356 m/s
2
Hand-arm vibration (steering
wheel)
0.971 m/s
2
Uncertainty
1.5 m/s
2
Noise emission level (in accordance with EN ISO 5395-1 and
EN ISO 5395-3)
A-weighted sound pressure
level
88.4 dB(A)
Uncertainty
3 dB
A-weighted sound power level 96.2 dB(A)
Uncertainty
0.92 dB
ACCESSORIES
Catching Blades and Bagger
ACRM008
(6282461)
Mulching Blades
(as installed by the operator, for
mulching and side discharge)
ACRM009
(997241)
Catching Blades
(for use with bagger)
ACRM010
(682461)
WARNING!
Current attachments and accessories
available for use with the product are listed above. Do not
use any attachments or accessories not recommended by
the manufacturer of the product. The use of attachments or
accessories that are not recommended can result in serious
personal injury.
REPLACEMENT PARTS
Mulch cover
099749052018
Side discharge chute
099749052019
Front wheels
099749052020
Rear wheels
099749052021
Battery
099749052022
WARNING!
The vibration and noise emission levels
given in this instruction manual have been measured in
accordance with a standardised test and may be used to
compare one tool with another. They may be used for a
preliminary assessment of exposure.
The declared vibration and noise emission levels represent
the main applications of the tool. However, if the tool is used
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
may differ. These conditions may significantly increase the
exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise
should take into account the times when the tool is turned off
or when it is running idle. These conditions may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.
Summary of Contents for RM300E
Page 1: ...RM300E ...
Page 10: ...10 Know your product ...
Page 11: ...11 Know your product 12 mm 13 mm 6 mm x3 ...
Page 43: ... 1 5 P 1 5 1 5 ...