24
Maintenance
2
1
5
2
1
1
2
3
4
5
6
1
2
3
4
5
6
1
2
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
8
6
7
> 3.1 mm
< 3.1 mm
NOTE:
If the distance between the two
sides is greater than 3.1 mm, side-to-side
adjustment is necessary.
5. On the side that needs adjustment,
loosen the jam nuts.
6. Turn the adjustment nut clockwise to
raise or counter clockwise to lower the
side of the cutting deck.
NOTE:
If raising the side, turn the top
adjustment nut, then the bottom nut.
If lowering the side, turn the bottom
adjustment nut, then the top nut.
Measure the distance between the
blades again. Continue to adjust and
measure until the distance is less than or
equal to 3.1 mm.
7. Turn the blades so that the ends point
towards the front and back of the mower.
8. On the front and rear tip of the blade,
measure the distance from the tip to the
ground.
Summary of Contents for RM300E
Page 1: ...RM300E ...
Page 10: ...10 Know your product ...
Page 11: ...11 Know your product 12 mm 13 mm 6 mm x3 ...
Page 43: ... 1 5 P 1 5 1 5 ...
