Ryobi RM300E, Manual

Page: 14 / 44

14
Getting started
1
3
2
25 Nm
9 10 11
Install the steering column over the
steering shaft.
Install the spacer, steering wheel
hub, and steering wheel on top of the
steering column.
Install the flat washer and bolt. Tigthen
the bolt to 25 Nm of torque. Install the
steering wheel cover.
3
1
2
24 HRS
14
Connect the charger cable to the
charging port. Connect the charger to
an AC outlet. Charge the mower for 24
hours.
1
2
3
15
When the batteries are full, disconnect
the charger cable and close the
charging port cover.
16
1.4 bar
Check that the air pressure in all four
tyres is 1.4 bar (140 kPa).
20
Test the safety interlock system. Pull
up the blade engage knob to activate
the blades. Stand up and check that
the blades stop. Sit back down, and
press the blade engage knob to stop
the blades.
21
Drive off the mower from the bottom frame in reverse. Before and while
reversing, look behind and down for small children, bystanders, and pets. Step
on the reverse pedal to move in reverse.
(140 kPa)