background image

13

ENGLISH

idle. Turn the idle speed screw counter clockwise to 
reduce the idle RPM and stop the cutting attachment, 
or contact a service dealer for adjustment and 
discontinue use until the repair is made. Serious 
personal injur y may result from the cutting 
attachment turning at idle.

CLEANING AIR FILTER SCREEN

See Figures 17.

■ 

For proper performance and long life, keep air filter 
screen clean.

■ 

Remove the air filter cover by pushing down on the 
latch with your thumb while gently pulling on the 
cover.

■ 

Brush the air filter screen lightly to clean. 

■ 

Replace the air filter cover by inserting the tabs on 
the bottom of the cover into the slots on the air filter 
base; push the cover up until it latches securely in 
place.

FUEL TANK

WARNING:

A leaking fuel cap is a fire hazard and must be
replaced immediately.

MAINTENANCE

The fuel cap contains a sealing gasket and a check valve 
to ventilate built up fuel gasses. A clogged check valve 
will cause poor engine performance. If performance 
improves when the fuel cap is loosened, the check valve 
may be faulty. Replace fuel cap if required.
The fuel supplied to the engine is passed through a filter 
to remove any contaminants from entering the engine. 
Contaminants in the fuel can cause poor performance 
and damage to the engine.
The fuel filter is a non-serviceable item and if needed 
should be replaced by a AUTHORISED SERVICE 
CENTRE.

SPARK PLUG REPLACEMENT

This engine uses a Champion RY4C or NGK CMR7A 
spark plug with 0.6mm electrode gap. Use an exact 
replacement and replace annually.

STORING THE  PRODUCT

■ 

Clean all foreign material from the product. Store 
idle unit indoors in a dry, well-ventilated area that is 
inaccessible to children. Keep away from corrosive 
agents such as garden chemicals.

 

When storing 1 month or longer:

■ 

Drain old fuel from tank into a container approved for 
petrol and dispose of thoughtfully. Refill with fresh fuel 
before using product.

■ 

Abide by all ISO and local regulations for the safe 
storage and handling of petrol.

RBC430SES/SBS manual(TTIA).indd   Sec2:13

RBC430SES/SBS manual(TTIA).indd   Sec2:13

09-9-23    5:25

09-9-23    5:25

Summary of Contents for RBC430SBS


















Reviews: