6
ENGLISH
RBC430SBS
Figure 1
1. Shoulder strap
2. Tri-Arc
®
blade
3. Drive shaft
4. Coupler
5. Strap hanger
6. Ignition switch
7. Trigger lock
8. Left handle
9. Primer bulb
10. Fuel cap
11. Recoil starter
12. Throttle trigger
13. Latch
14. Right handle
15. Wing knob
16. Blade deflector
17. Choke lever
18. Grass deflector
19. Cutting line
20. Reel-Easy™ line trimmer head
21. Pro Cut II™ line trimmer head
Figure 2
22. Lower boom
23. Lock
24. Guide recess
25. Power head (upper) shaft
26. Position hole
Figure 3
27. Hole on the attachment hanger to fit lock button of
lower booms
28. Attachment hanger
Figure 4
29. Screw
30. Clamp
31. Wing knob
Figure 5
32. Gear case assembly
33. Holding pin tool
34. Mounting plate
35. Combination wrench
36. Reel-Easy™ line trimmer head
37. Bolt
Figure 7
38. Oil cap / dipstick
39. Level indicator
40. Oil fill hole
41. Funnel
Figure 10
42. Trimmer line cut-off blade
Figure 13
43. Start position
44. Run position
Figure 15
45. Tri-Arc
®
blade protector
Figure 16
46. Idle speed screw
Figure 17
13. Latch
47. Filter screen
48. Air filter cover
ASSEMBLY
UNPACKING
This product requires assembly.
■
Carefully remove the tool and any accessories from
the box. Make sure that all items listed in the packing
list are included.
■
Inspect the tool carefully to make sure no breakage
or damage occurred during shipping.
■
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
■
If any parts are damaged or missing do not operate
this product until the parts are replaced. Please call
Ryobi customer service for assistance.
W
ARN
I
N
G:
If any parts are damaged or missing do not
operate this product until the parts are replaced.
Failure to heed this warning could result in
serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always ensure the
cut off switch remains in the off position when
assembling parts.
INSTALLING THE POWER HEAD SHAFT TO THE
ATTACHMENT
See Figure 2.
WARNING:
Never install, remove, or adjust any attachment
while power head is running. Failure to stop the
engine can cause serious personal injury.
RBC430SES/SBS manual(TTIA).indd Sec2:6
RBC430SES/SBS manual(TTIA).indd Sec2:6
09-9-23 5:25
09-9-23 5:25
