4
ENGLISH
SYMBOL
NAME
EXPLANATION
Half choke position (For cold conditions. See troubleshooting).
Do not depress throttle trigger while starting.
Pla
ce the en
gine switch to the “
on
” (
I
) position
PRIME - press the primer bulb 10 times slowly
SET
the chok
e lev
er to the “
START
” position
PULL
the starter rope with a quick firm and consistent upward
motion
until the engine starts
.
Note:
If difficulties with starting are experienced (this may occur in
colder conditions) refer to troubleshooting section in this manual.
Allow engine to warm up for 5-20 seconds.
Squeeze the throttle trigger to run.
Note:
Squeezing the throttle trigger releases the start lever to the
RUN
position.
To stop the unit: Place the engine switch to the “
O
” position
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided,
will result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
10
10
10
SYMBOLS
10
10
10
10
10
HALF
CHOKE
RBC430SES/SBS manual(TTIA).indd Sec2:4
RBC430SES/SBS manual(TTIA).indd Sec2:4
09-9-23 5:25
09-9-23 5:25
