15
Getting started
Connect each battery pack’s quick-
connect plugs. These plugs connect
the battery packs to the product. Close
the cover.
NOTE:
Lock each battery latch to
secure the battery packs in place.
1
2
9
1
2
10
Open the battery covers located on
each side of the mower. Raise the
battery pack from the port.
5
For side discharge chute configuration,
lower down the side discharge chute,
and make sure that it is properly closed.
6
11
14
Install the seat, aligning the mounting holes to the mounting bracket on the mower.
Install bolts on each side. Tighten the bolts to secure the seat.
1
2
3
M10x50
4
16
Set the cutting deck to the preferred
cutting height.
NOTE:
When using the ride-on mower
for the first time, it is recommended to
mow the lawn at a higher cutting height
on the first pass and then gradually
lowering the cutting height by single
steps until the preferred lawn height is
achieved.
Connect the charger to an AC outlet.
Disconnect the charger from the
AC outlet once it is fully charged.
Disconnect the charger cable from the
charging port. Close the charging port
cover.
17
1
2
3
15
14
Summary of Contents for R80XZTR54
