21
Operation
2
1
3
1
2
1
3
2
1
2
SETTING THE CUTTING HEIGHT
1. Step on the brake pedal, and engage the
parking brake.
2. Press the blade engage knob to stop the
blades. Turn the start key to the OFF
position, and remove the key.
NOTE:
Always remove the start key
when leaving the product unattended,
even if for just a brief period.
3. Set the cutting deck to the preferred
cutting height.
NOTE:
The auto-stop plug (included) stops
the lever to the preferred cutting height. After
the correct height is set, insert the auto-stop
plug below the lever.
Summary of Contents for R80XZTR54
