background image

4

GENERAL SAfETY RULES

SPECifiC SAfETY RULES

 

know your inflator. 

Read operator’s manual carefully. 

Learn its applications and limitations, as well as the spe-
cific potential hazards related to this tool. Following this 
rule will reduce the risk of electric shock, fire, or serious 
injury.

 

Risk of Bursting. 

Do not preset inflator to result in output 

pressure greater than marked maximum pressure of item 
to be inflated. Do not use at pressure greater than 150 
PSI.

 

To reduce the risk of electric shock,

 do not expose to 

rain. Store indoors.

 

inspect yearly for cracks, pin holes, or other imper-
fections that could cause inflator to become unsafe. 

Never cut or drill holes in the inflator.

 

Make sure the hose is free of obstructions or snags.

 

Entangled or snarled hoses can cause loss of balance or 
footing and may become damaged. 

 

Use the inflator only for its intended use. Do not alter 
or modify the unit from the original design or func-
tion.

 

Always be aware that misuse and improper handling of 
this inflator can cause injury to yourself and others.

 

Never leave a inflator unattended with the air hose 
attached.

 

Do not continue to use a inflator or hose that leaks 
air or does not function properly.

 

Always disconnect the air supply and power supply 
before  making  adjustments,  servicing  a  inflator,  or 
when an inflator is not in use.

 

Do  not  attempt  to  pull  or  carry  the  inflator  by  the 
hoses.

 

Always follow all safety rules recommended by the 
manufacturer of your inflator, in addition to all safety 
rules for the inflator. 

Following this rule will reduce the 

risk of serious personal injury.

 

Do not use inflator as a breathing device.

 

Never direct a jet of compressed air toward people or 
animals. Take care not to blow dust and dirt towards 
yourself or others. 

Following this rule will reduce the risk 

of serious injury.

 

Protect  your  lungs. 

Wear  a  face  or  dust  mask  if  the 

operation is dusty. Following this rule will reduce the risk 
of serious personal injury.

 

Do not use this inflator to spray chemicals. 

Your lungs 

can be damaged by inhaling toxic fumes. 

 

Check damaged parts. Before further use of the infla-
tor or air tool, a guard or other part that is damaged 
should be carefully checked to determine that it will 
operate properly and perform its intended function. 
Check for alignment of moving parts, binding of mov-
ing parts, breakage of parts, mounting, and any other 
conditions that may affect its operation. A guard or 
other part that is damaged should be properly repaired 
or replaced by an authorized service center. 

Follow-

ing this rule will reduce the risk of shock, fire, or serious 
injury.

  

Do not crush, drop or damage battery pack. Do not 
use a battery pack or charger that has been dropped 
or received a sharp blow. 

A damaged battery is subject 

to explosion. Properly dispose of a dropped or damaged 
battery immediately.

 

Do  not  charge  battery  tool  in  a  damp  or  wet 

location. 

Following this rule will reduce the risk of electric 

shock.

 

inspect tool cords periodically and, if damaged, have 
repaired at your nearest Authorized Service Center. 
Constantly stay aware of cord location. 

Following this 

rule will reduce the risk of electric shock or fire.

 

Save these instructions. 

Refer to them frequently and 

use them to instruct others who may use this inflator. If 
you loan someone this inflator, loan them these instruc-
tions also.

 

Never point any inflator toward yourself or others.

 

keep the exterior of the inflator dry, clean, and free 
from  oil  and  grease.

  Always  use  a  clean  cloth  when 

cleaning.  Never  use  brake  fluids,  gasoline,  petroleum-
based products, or any strong solvents to clean the unit. 
Following this rule will reduce the risk of deterioration of 
the enclosure plastic.

 

Do not exceed the pressure rating of any component 
in the system. 

 

Protect material lines and air lines from damage or 
puncture.

 Keep hose and power cord away from sharp 

objects, chemical spills, oil, solvents, and wet floors.

SERviCE

 

inflator service must be performed only by qualified 
repair personnel. 

Service or maintenance performed by 

unqualified personnel may result in a risk of injury.

 

When servicing an inflator, use only identical replace-
ment parts. follow instructions in the Maintenance 
section  of  this  manual.

  Use  of  unauthorized  parts  or 

failure to follow Maintenance Instructions may create a 
risk of shock or injury.

Summary of Contents for P730

















Reviews: