background image

9

ASSEMBLY

UNPACkiNG

This product has been shipped completely assembled.

  Carefully remove the inflator and any accessories from 

the box. Make sure that all items listed in the packing list 
are included.

  Inspect the inflator carefully to make sure no breakage 

or damage occurred during shipping.

  Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the inflator.

  If  any  parts  are  damaged  or  missing,  please  call 

1-800-55-579 for assistance.

PACkiNG LiST

18 Volt Inflator
Tapered Adaptor
Sport Ball Needle
Presta Valve Adaptor
Schrader Valve Removal Tool
Replacement Fuse
Operator’s Manual

WARNiNG: 

If  any  parts  are  damaged  or  missing  do  not  operate 
this inflator until the parts are replaced. Failure to heed 
this warning could result in serious personal injury.

WARNiNG: 

Do not attempt to modify this inflator or create acces-
sories not recommended for use with this inflator. Any 
such alteration or modification is misuse and could re-
sult in a hazardous condition leading to possible serious 
personal injury.

WARNiNG:

To prevent accidental starting that could cause serious 
personal injury, always remove the battery pack from the 
inflator when assembling parts.

OPERATiON

WARNiNG:

Do  not  allow  familiarity  with  tools  to  make  you   
careless. Remember that a careless fraction of a second is 
sufficient to inflict serious injury.

WARNiNG:

Always wear safety goggles or safety glasses with side 
shields when operating inflators. Failure to do so could  
result in objects being thrown into your eyes, resulting in 
possible serious injury.

  WARNiNG:

 

Do  not  leave  items  to  be  inflated  unattended  while   
inflator is in use. These items can burst and could cause 
serious injury.

APPLiCATiONS

You may use this inflator for the purpose listed below:

 

Inflating  air  mattresses,  sports  balls,  tires,  floats,  and 
toys

NOTE:

  The  inflator  is  not  designed  for  commercial   

application.

  CAUTiON:

If at any point during the charging process none of the 
LEDs are lit, remove the battery pack from the charger 
to avoid damaging the product. DO NOT insert another 
battery. Return the charger and battery to your nearest 
service center for service or replacement.

WARNiNG:

Do  not  use  any  attachments  or  accessories  not   
recommended by the manufacturer of this tool. The use 
of  attachments  or  accessories  not  recommended  can 
result in serious personal injury.

CAUTiON:

 

The inflator is capable of inflating to 

150 PSI, 10.34 BAR, 

or 10.55 Kg/Cm

. To avoid over inflation, carefully follow 

instructions  on  items  to  be  inflated.  To  avoid  product 
damage, never exceed recommended pressures.

WARNiNG:

 

Since  the  pressure  display  is  not  calibrated,  and  is   
therefore  not  binding  for  exact  values,  tire  pressure 
must be checked using a calibrated measuring device 
before driving a vehicle with vehicle tires inflated with the  
inflator.  Driving  a  vehicle  with  improperly  inflated  tires 
could result in serious injury. 

CAUTiON:

 

The inflator is not designed for continuo

us use. For every 

ten minutes of inflator use, ten minutes of cool down time 
when the inflator is not in use is required.

Summary of Contents for P730

















Reviews: