Ryobi P561, Operator'S Manual

Page: 8 / 34

6 – English
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result in death
or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result in death
or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in minor
or moderate injury.
NOTICE:
(Without Safety Alert Symbol) Indicates important information not related to an injury
hazard, such as a situation that may result in property damage.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
Safety Alert Symbol Indicates a potential personal injury hazard.
Read Operator’s Manual
To reduce the risk of injury, user must read and understand operator’s
manual before using this product.
Eye and Head Protection
Always wear eye protection with side shields marked to comply with
ANSI Z87.1. Wear head protection when operating this equipment above
shoulder level.
Wet Conditions Alert Do not expose to rain or use in damp locations.
No Hands Symbol
Failure to keep your hands away from the blade will result in serious
personal injury.
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
No Hands Placement
Symbol
Do not place hands in this area.
Gloves Wear non-slip, heavy-duty protective gloves when handling the blade.
Recycle Symbols
This product uses nickel- cadmium (Ni-Cd) and lithium-ion (Li-ion)
batteries. Local, state or federal laws may prohibit disposal of batteries
in ordinary trash. Consult your local waste authority for information
regarding available recycling and/or disposal options.
V Volts Voltage
min Minutes Time
Direct Current Type or a characteristic of current
no
No Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute