background image

7 — English

WARNING:

To prevent accidental starting that could cause serious 
personal injury, always remove the battery pack from the 
product when assembling parts.

CONNECTING THE SPRAY WAND TO THE 
HANDLE

See Figure 2.

  Insert the spray wand into the the handle as shown.

  Slide the o-ring down until it touches the handle.

  Thread the cap onto the handle and tighten securely.

  Rotate the nozzle until it is aligned with the handle (pointing 

down) and ready for use.

  Slide the nut onto the cap and tighten securely.

  Pull on the spray wand to be certain it is properly secured.

  Place the assembled handle into the handle storage area.

ATTACHING THE HOSE

See Figures 3 - 4.

To attach the hose to the tank:

  Slide the nut on the hose away from the hose end.

  Insert the hose end into the opening on the tank as shown. 

Make sure the connection is secure.

  Slide the nut over the opening and hose end. Hand tighten. 

Do not overtighten.

To attach the hose to the handle:

The hose comes preassembled to the handle. If it becomes 
loose, follow the instructions below.

  Thread the cap onto the handle and tighten securely.

  Slide the nut on the hose away from the hose end.

  Insert the hose end into the opening on the cap. Make 

sure the connection is secure.

  Slide the nut over the hose and cap. Hand tighten. Do 

not overtighten.

WARNING:

Do not allow familiarity with the product to make you 
careless. Remember that a careless fraction of a second 
is sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields or goggles 
marked to comply with ANSI Z87.1. Failure to do so could 
result in fluids entering your eyes resulting in possible 
serious injury.

WARNING:

Do not use any attachments or accessories not 
recommended by the manufacturer of this product. The 
use of attachments or accessories not recommended 
can result in serious personal injury.

WARNING:

Use safety equipment. Protect your eyes, skin, and lungs 
while mixing, filling, spraying, and cleaning. Failure to do 
so may result in serious personal injury and damage to 
property.

NOTICE

:

 

Before each use, inspect the entire product for damaged, 
missing, or loose parts such as screws, nuts, bolts, 
caps, etc. Tighten securely all fasteners and caps and 
do not operate this product until all missing or damaged 
parts are replaced. Please contact customer service or 
a qualified service center for assistance.

APPLICATIONS

You may use this product for the purpose listed below:

 

For use with most consumer grade home and garden 
chemicals, such as insecticides, fungicides, weed killers, 
and fertilizers

ASSEMBLY

OPERATION

Summary of Contents for P2800





































Reviews: