4 — English
ASSEMBLY
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
NOTICE
:
(Without Safety Alert Symbol) Indicates important information not related to an
injury hazard, such as a situation that may result in property damage.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
Safety Alert
Indicates a potential personal injury hazard.
Read Operator’s
Manual
To reduce the risk of injury, user must read and understand operator’s manual
before using this product.
Eye Protection
Always wear eye protection with side shields marked to comply with ANSI
Z87.1.
Wet Conditions
Alert
Do not expose to rain or use in damp locations.
Hot Surface
To reduce the risk of injury or damage, avoid contact with any hot surface.
Recycle Symbols
This product uses nickel- cadmium (Ni-Cd) and lithium-ion (Li-ion) batteries.
Local, state or federal laws may prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for information regarding available
recycling and/or disposal options.
V
Volts
Voltage
min
Minutes
Time
Direct Current
Type or a characteristic of current
no
No Load Speed
Rotational speed, at no load
.../min
Per Minute
Revolutions, strokes, surface speed, orbits etc., per minute
FEATURES
PRODUCT SPECIFICATIONS
P271 DRILL-DRIVER
Chuck ...........................................................1/2 in. Keyless
No Load Speed ......................... 0-440/0-1,600/min. (RPM)
Clutch .............................................................. 24 Positions
Torque ................................................................... 340 in.lb.
P234G IMPACT DRIVER
Coupler ...................................................................... 1/4 in.
No Load Speed ................................... 0-2,600 /min. (RPM)
Torque ...............................................................1,500 in.lbs.
Impacts Per Minute ............................................. 3,200 IPM
