background image

5 — English

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper 
interpretation of these symbols will allow you to operate the product better and safer.

SYMBOL

NAME

DESIGNATION/EXPLANATION

V

Volts

Voltage

min

Minutes

Time

Direct Current

Type or a characteristic of current

no

No Load Speed

Rotational speed, at no load

.../min

Per Minute

Revolutions, strokes, surface speed, orbits etc., per minute

ASSEMBLY

 WARNING:

Do not use this product if it is not completely assembled 
or if any parts appear to be missing or damaged. Use of 
a product that is not properly and completely assembled 
or with damaged or missing parts could result in serious 
personal injury.

 WARNING:

Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this 
product. Any such alteration or modification is misuse 
and could result in a hazardous condition leading to pos-
sible serious personal injury.

If any parts are damaged or missing, please call 1-800-525-2579 for assistance.

 WARNING:

Do not allow familiarity with this product to make you 
careless. Remember that a careless fraction of a second 
is sufficient to inflict serious injury.

 WARNING:

Always remove battery pack from the tool when you are 
assembling parts, making adjustments, cleaning, or when 
not in use. Removing battery pack will prevent accidental 
starting that could cause serious personal injury.

OPERATION

 WARNING:

Always wear eye protection with side shields marked to 
comply with ANSI Z87.1. Failure to do so could result in 
objects being thrown into your eyes and other possible 
serious injuries.

 WARNING:

Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of 
attachments or accessories not recommended can result 
in serious personal injury.

                 

Summary of Contents for P118B



















































































Reviews: