Ryobi GD200B, Operator'S Manual

Page: 19 / 160

19 - English
Fig. 25
Fig. 23
Front of
Power Head
Front of
Power Head
Nut
Bracket
Stud
Stud

Remove the tape securing the Wi-Fi antenna and raise it
to an upright position to ensure the best Wi-Fi signal.
NOTE:
Ensure that the antenna is screwed into the power
head securely.

Hold the rail assembly above the power head with arrow
pointing toward the front of the power head and the
garage door.

Rotate the rail assembly until the opening in the rail is
aligned with the sprocket.

Lower the end rail onto the sprocket with the channel
(open end) facing down. Slowly rotate the rail to the
correct orientation as you lower it into position.

When installed correctly, the teeth on the sprocket should
engage the rail assembly and the rail should sit flat on the
power head.

Place the bracket on top of the studs, and over the end
rail.

Place nuts onto the studs and tighten using a 7/16 in.
socket.
Do not overtighten.
Wi-Fi
Antenna
Wi-Fi
Antenna
Sprocket
Fig. 24
ASSEMBLY