Ryobi GD200B, Operator'S Manual

Page: 44 / 160

44 - English
Fig. 73
USING THE INDOOR KEYPAD
See Figure 73.
WARNING:
Keep moving door in sight when using indoor keypad.
Contact with moving door can cause DEATH or serious
injury.

Install the indoor keypad according to the instructions
included in the keypad operator’s manual.
 To raise or lower the garage door, press and release the
UP/DOWN
button.

To enter and exit vacation mode, press and release the
LOCK ( ) button. When the unit is in vacation mode, it
can only be controlled using the indoor keypad. The unit
will not respond to the car remotes, outdoor keypad, or
smartphone app.
Up/Down
Button
Light
Button
Lock
Button
Accessory
Port #7
Accessory
Port #1
AC
Receptacle
AC
Receptacle
Accessory
Port #4
Accessory
Port #3
Accessory
Port #2
Accessory
Port #6
Accessory
Port #5
NOTE: Wireless keypads come with a receiver. When a
wireless keypad is locked, the LED on the receiver will
blink continuously.

To turn the LED lights on and off, press and release the
LIGHT ( ) button.
NOTE: When the LIGHT ( ) button is pressed, the LED
light will illuminate for three minutes.
Activating and Deactivating Accessory Ports:

To activate a accessory port, press the number on the
indoor keypad corresponding with the desired port. For
example, to activate accessory port #2 press
NUMBER 2
on your keypad.
NOTE: An active accessory port can be used to power
DC accessories. Multiple ports can be activated at once.

To deactivate a accessory port, press the number on the
indoor keypad corresponding with the port.
OPERATION