Ryobi EXPAND-IT RXB01, Original Instructions Manual

Page: 6 / 184

4 | English
■
When transporting the product in a vehicle,
secure it against movement or falling to
prevent injury to persons or damage to the
product.
■
Never carry or transport the product while
the engine is running.
■
Abide by all government and local
regulations for the safety storage and
handling of petrol.
Short term (less than 1 month)
■
Stop the engine and allow it to cool before
storing.
■
Clean all foreign material from the product.
■
Store the product in a cool, dry, and well-
ventilated place that is inaccessible to
children.
■
Keep away from corrosive agents such as
garden chemicals and de-icing salts.
■
Do not store outdoors.
For assembling with electric-driven power
head
■
Stop the product, disconnect from the
power supply, and wind the cable. Allow
the product to cool before storing or
transporting
■
Clean all foreign material from the product.
Store it in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep
it away from corrosive agents, such as
garden chemicals and de-icing salts. Do
not store outdoors.
■
For transportation, secure the product
against movement or falling to prevent
injury to persons or damage to the product.
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories, and
attachments. Failure to do so can cause
possible injury, poor performance, and may
void your warranty.
WARNING
Servicing requires extreme care and
knowledge, and should be performed
only by a qualifi ed service technician. For
service we suggest you bring the product to
your nearest authorised service centre for
repair. When servicing, use only identical
replacement parts.
■
Switch off, disconnect the product from the
power supply (if applicable), and make sure
all moving parts have come to a complete
stop before conducting any maintenance
or cleaning work.
■
You may make adjustments and repairs
described in this manual. For other repairs,
contact the authorised service centre.
■
After each use, clean the product with a
soft, dry cloth.
■
Check all nuts, bolts, and screws at frequent
intervals for proper tightness to ensure the
product is in safe working condition. Any
part that is damaged should be properly
repaired or replaced by an authorized
service centre.
RESIDUAL RISKS
Even when the product is used as prescribed,
it is still impossible to completely eliminate
certain residual risk factors. The following
hazards may arise in use and the operator
should pay special attention to avoid the
following:
■
Injury caused by vibration. Always use
the right tool for the job. Use designated
handles and restrict working time and
exposure.
■
Hearing injury caused by exposure to
noise. Wear hearing protection and limit
exposure.
■
Injury from flying objects from the blow tube
airflow. Wear adequate eye protection at
all times.
RISK REDUCTION
It has been reported that vibrations
from handheld tools may contribute to a
condition called Raynaud’s Syndrome in
certain individuals. Symptoms may include