![background image](http://html1.mh-extra.com/html/ryobi/embs200/embs200_owners-operation-manual_1506209006.webp)
Carefully remove all parts from the shipping carton.
Lift the bench belt & disc sander from the carton and
place it on a level work surface.
Do not discard the packing materials until you have
carefully inspected the machine, identified all loose parts,
and satifactorily operated your belt and disc sander.
Examine all parts to make sure no breakage or damage
has occurred during shipping.
If all parts have been included, proceed to assembly.
If any parts are damaged or missing, do not attempt to
plug in this tool or turn it on until the damaged or
miss ing parts are obtained and installed correctly.
Contact your nearest Ryobi dealer for assistance if an parts
are missing or damage.
UNPACKING
LOOSE PARTS LIST
WARNING:
If any parts are missing do not operate this machine
until the missing parts are replaced. Failure to do
so could result in possible serious injury.
The following items are included with your Belt & Disc Sander:
•
Sanding Disc Table
•
Sanding Belt Table
•
Handles for Sanding Disc Table (2)
•
Handle for Sanding Belt Table (2)
•
Cover for Sanding Disc
•
Rubber Feet (4)
•
Mitre Gauge
•
Sanding Disc
•
Sanding Belt
•
3mm Hex Key
EMBS200 MANUAL 2 5/5/05 2:57 PM Page 6