16
English(Original instructions)
EN
FR
DE ES
IT
PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT
LV SK BG
The safe use of this product requires an understanding
of the information on the product and in this operator’s
manual as well as a knowledge of the task you are
attempting.
Before using of this product, familiarize yourself with all
operating features and safety rules.
CLEANING DECK
The cleaning deck can be used to clean large flat areas
using less time and energy than when using the lance.
DETERGENT TANK
Remove the cap from the detergent tank to add detergent
to the pressure washer.
HIGH PRESSURE HOSE STORAGE
Once the high pressure hose is rolled, hang it on the
back of the machine using the hook-and-loop strap to
secure in place.
ON/OFF SWITCH
This switch turns the pressure washer on and off.
GUN
The pressure washer gun has a gripping surface that
provides added control of the lance and helps reduce
fatigue.
TRIGGER WITH LOCK OUT
The trigger lock-out prevents accidental use of the high-
pressure trigger.
ASSEMBLY
UNPACKING
This product requires assembly.
■
Carefully cut the box down the sides then remove the
product and any accessories from the box.
WARNING:
This new product has been shipped in a partially
assembled condition as described below.
If in doubt, call Ryobi Customer Service for assistance.
Operation of a product that may have been improperly
preassembled could result in serious personal injury.
■
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
■
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
■
If any parts are damaged or missing, please call
Ryobi Customer Service for assistance.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result
in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modifi cation is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
ASSEMBLING THE LANCE
See Figure 5.
■
Insert the end of the lance into the gun.
■
Turn the connector clockwise until it stops. This
secures the lance in place.
CONNECTING HIGH PRESSURE HOSE TO GUN
See Figure 7.
■
Insert the
connector on the end of the high pressure
hose collar into the gun.
■
Slide the collar over the coupler turning the collar
clock wise to tighten securely.
■
Pull on the hose to be certain it is properly secured.
CONNECTING THE HIGH PRESSURE HOSE TO THE
PUMP
See Figure 4.
■
Insert the
connector on the end of the high pressure
hose collar into the pump outlet coupler.
■
Slide the collar over the coupler turning the collar
clock wise to tighten securely.
■
Pull on the hose to be certain it is properly secured.
CONNECTING THE WATER SUPPLY TO PRESSURE
WASHER
See Figure 3.
The water supply must come from a water main. NEVER
use hot water or water from ponds, lakes, etc. For ease
of use, a self-coiling hose is provided.
NOTE: When using the self-coiling hose, be sure that the
hose does not become crimped during use as this may
cause damage to the pump.
CAUTION:
When connecting the appliance to the water supply
mains (not public drinking water supply mains),
RPW105DM 25lgs.indd 16
RPW105DM 25lgs.indd 16
2009/12/11
3:49
2009/12/11
3:49
