Ryobi DP103L, Operator'S Manual

Page: 8 / 52

8 - English
FEATURES
Spindle Travel ............................................................... 2 in.
Table Size ............................................. 7-5/8 in. x 6-1/2 in.
Table Movement ...............................45° bevel, 360° swivel
Overall Height ............................................................. 29 in.
PRODUCT SPECIFICATIONS
Chuck ........................................................................ 1/2 in.
Input ............................... 120 Volt, 60Hz, AC Only, 3 Amps
Motor ........................................................1/4 HP Induction
No Load Speed ............................. 620–3,100 r/min. (RPM)
Swing .......................................................................... 10 in.
KNOW YOUR DRILL PRESS
See Figure 2, page 16.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BEVEL SCALE
The bevel scale indicates the degree the table is tilted.
CHUCK
Your drill press features a standard three-jaw type chuck
with a self-ejecting chuck key, which prevents accidentally
starting the drill press with the key still engaged in the chuck.
EXACTLINE
™
LASER
The Exactline
™
laser makes accurate, precision drilling
simple and easy.
DEPTH GAUGE
A depth gauge is located between the pulley housing and
feed handles to aid in drilling at desired depths.
DEPTH STOP
The adjustable locking depth stop permits accurate depth
measurement and repetitive drilling.
FEED HANDLES
Feed handles raise and lower the chuck and bit during the
drilling operation.
MOTOR
Your drill press is equipped with an industrial duty induction
motor for long-lasting, smooth performance.
SPINDLE SPEED
Five different spindle speeds allow you to drill a wide variety
of material including wood, plastic, and metal.
TABLE
The table of your drill press rotates 360˚ and bevels up to
45˚ for angle drilling.
WORKLIGHT
The integrated LED worklight can be used to help illuminate
the work area.