6.1
Prepare pill cards in sealing paddle and close the pill card.
6.2
Insert sealing paddle into AutoSealer.
6.3
Press both Cycle Buttons at the same time.
The AutoSealer will now apply heat & pressure to the pill cards.
This two handed action is for safety
6.4
The heat plate will return when it is complete. The default
seal time is 3 seconds.
6.5
Remove paddle as the pill cards are now sealed.
During this operation
the screen will show
When complete the
screen will return to
6. Daily Operation
The AutoSealer will automatically seal pill cards at a constant
temperature and pressure over a set time - you only need to
push both cycle buttons to start the sealing cycle. However,
before you do there are some preperations you need to
make.
Page 7
