3. Health and safety
6
The user must ensure that...
... the floor on which the wet separator
is placed has an adequate load bear-
ing capacity.
..,. because of the ventilation slots
arranged at the side of the wet separa-
tor, keep it a minimum of 20 cm away
from walls and adjoining objects.
... the wet separator is always emptied
and cleaned before it is removed from
service or stored.
... the wet separator is always posi-
tioned on a level surface (base) if
removed from service or stored.
... the parking brake (if fitted) is always
applied.
... the wet separator is secured in posi-
tion by additional means and cannot
roll away when stored on a non-slip-
proof floor or sloping surfaces with
gradients of more than 10°.
3.4 Positioning and storage
The user must ensure that...
... the equipment is only cleaned with
water or standard commercially avail-
able cleaning agents.
... the person cleaning the wet separa-
tor wears personal protective equip-
ment appropriate to the medium.
See Section 9
CAUTION!
Before cleaning the equipment, check
that the cleaning agents to be used will
not react with the material that was
vacuumed up.
3.6 Cleaning
The user must ensure that...
... the equipment has been cleaned
before it is transported.
... the liquid container is locked using
the lever.
... all load handling equipment used
during transportation is suitable for the
task and has a minimum load capacity
greater than the weight of the wet sep-
arator being moved.
... the wet separator is secured to pre-
vent sliding and tipping during trans-
portation in a vehicle.
3.3 Transportation
3.7 Servicing
The user must ensure that...
... the floor on which the wet separator
is placed has an adequate load bear-
ing capacity.
... the vacuum hose (and any other
accessories) are connected.
3.5 Assembly
3.8 Disassembly / Disposal
The user must ensure that...
... wet separators are emptied and
cleaned before dismantling.
... Industrial vacuum systems are dis-
posed of only in accordance with
national legislation.
... the dispose of the equipment at the
end of its service life will be in accor-
dance with applicable legal regulations.
The user must ensure that...
... maintenance is only carried out on
wet separators that are empty and
clean.
... The equipment must be
discon-
nected from the power supply
before any service or repair work is
performed on it.
... before working on the equipment,
unplug it from the mains.
Storage
ONLY WITHOUT liquid:
Temperature: 0° - 30°C
Humidity:
30% - 95%,
non-condensing
