4.
The iron is now ready for use.
5.
Press the Burst Of Steam Button.
6.
Steam will shoot out from the holes of the soleplate into the
fabric being ironed and remove the wrinkles.
7.
For stubborn wrinkles, wait a few seconds before pressing
the Burst Of Steam button again. Most wrinkles can be
removed within three presses.
Note:
It may be necessary to press the burst of steam button a few times to start
this function.
For optimum steam quality, do not operate the Burst Of Steam more than
three times after the pilot light goes off.
Vertical Burst of Steam Function
Warning:
Do not apply steam on any clothes or fabrics whilst being worn by humans or
pets. Temperature of steam is very high.
This function provides an extra amount of steam to remove wrinkles on
delicate garments in a hanging position, hanging curtains, or other
hanging fabrics.
1.
Fill the iron as described in “How To Fill the Tank with
Water”.
2.
Select the temperature to
●●●
(3 dots) or “Max”
setting ,
by pressing the control button. See “How To Set
Temperature”.
3.
When the required temperature is reached; the “STANDBY”
will be gone and the iron will beep twice. The iron is now ready
for use.
4.
Hold the iron between 15 and 30 centimeters away from the garment.
5.
Press the Burst of Steam Button.
6.
Steam will penetrate into the garment removing the wrinkles.
7.
For Stubborn wrinkles, wait a few seconds before pressing the
Burst Of Steam button again.
8.
Most wrinkles can be removed within three presses.
Note:
It may be necessary to press the burst of steam button a few times to start
this function.
For optimum steam quality, do not operate the Burst Of Steam more than
three times in succession.
Self-Cleaning
This function removes the scales and minerals build-up in the Steam
Chamber. The iron will remain in the best condition if this function is
PAGE 8 OF 12
