unattended and it is connected to a mains supply outlet.
Auto shut-off in horizontal Positioning
1.
The iron will switch off automatically between 16-39 seconds
if the iron is immobile in the ironing position (horizontal).
2.
“AUTO-OFF” will be shown on the LCD display.
3.
By simply moving the iron, the iron will switch itself back on.
Auto-shut off in vertical Position
1.
The iron will switch off automatically between 5 to 10 minutes if the iron
is left on its heel rest position (vertically).
2.
“AUTO-OFF” will be shown on the LCD display.
3.
By simply moving the iron, the iron will switch itself back on.
Note: The iron will take about 60 seconds to reach its previous soleplate
temperature.
Draining the Water & Storage Instructions
1.
Move the Steam Control/Self-Cleaning Knob to position.
2.
Disconnect the iron from the mains supply outlet.
3.
Press the Burst Of Steam button to release any trapped water
when the soleplate is still hot.
4.
Press the Spray Buttons to release any trapped water.
5.
Hold the iron upside down and gently shake it to remove the remaining
water.
Note:
Set the Steam Control Knob To position before storing the iron.
It is recommended to drain the water from the iron as this will reduce
calcification and lime build up in the steam chamber.
Cleaning
1.
Disconnect the iron from the mains supply outlet.
2.
Use a damp cloth or non-scratching cleaner to remove any deposits on
the soleplate or the cabinets.
Note:
Never use sharp or rough objects to remove the deposits on the soleplate.
Never use any abrasives, vinegar or de-scaling agents to clean the iron.
CHANGING THE FITTED/MOULDED PLUG
Should the need arise to change the fitted/moulded plug, follow these
instructions:
PAGE 10 OF 12
