background image

•  When using the slicing, shredding or dicing disc, do not let the food accumulate too high 

(over 2/3 full); stop and empty the processor bowl.

•  Do not use the processor to: 

Grind coffee beans, bones, grains or hard spices 

Liquefy fruits and vegetables 

Slice or chop warm meat

CARE AND CLEANING

This product contains no user serviceable parts. Refer service to qualified service professional.

CLEANING

IMPORTANT: Always disconnect and unplug your processor from the wall power outlet 
before cleaning.
CAUTION: blades are sharp. Handle blades and discs carefully.

•  Completely disassemble processor parts before washing.
•  Rinse parts immediately after processing for easier cleaning.
•  Wipe motor unit and feet with a damp cloth and dry thoroughly. Stubborn spots can be 

removed by rubbing with a damp cloth and a mild, nonabrasive cleaner. Do not immerse 
motor unit in liquid.

•  All removable parts can be washed by hand or in dishwasher, top rack only (T). However, 

note that hand-washing of plastic parts will help to maintain the food processor’s 
appearance.

•  Some staining of parts may occur. If so, make a paste of 2 tablespoons of baking soda and 

1 tablespoon of water. Apply to stains and let stand overnight. Rinse and dry.

•  Do not use rough scouring pads or cleansers on any plastic or metal parts.
•  Do not use alkaline cleaning agents or harsh abrasives.
•  Do not allow blades or discs to soak in water for long periods of time.
•  Remember to clean the internal shaft of the chopping blade. Use a brush to remove any 

residual food particles.

•  If you are having trouble closing the lid over the processor bowl, apply a small amount of 

vegetable oil to the rim of the cover and processor bowl. This should make the pieces work 
smoother when attaching the cover to the bowl.

18

Summary of Contents for RHFP6010AU





































Reviews: