22
RUSH PAR 2 CT Zoom™ User Manual
3. Clean lenses by wiping gently with a soft, clean lint-free cloth moistened
with a weak detergent solution. Do not rub the surface hard: lift particles
off with a soft repeated press. Dry with a soft, clean, lint-free cloth or low-
pressure compressed air. Remove stuck particles with an unscented
tissue or cotton swab moistened with glass cleaner or distilled water.
4. Check that the fixture is dry before reapplying power.
Fuse replacement
If the fixture is completely dead, the fixture’s primary fuse F1 may have
blown and it may be necessary to install a new fuse. This fuse is located in a
fuseholder next to the Mains OUT socket on the connections panel (see
5
in
‘Fixture overview’ on page 13).
To change the fuse:
1. Disconnect the fixture from power and allow it to cool for at least 15
minutes.
2. Use a large flat-bladed screwdriver to unscrew the cap of the fuseholder.
3. Replace the fuse with one of the same type and rating only.
4. Reinstall the fuseholder cap before reapplying power.
Service and repairs
There are no user-serviceable parts inside the fixture. Do not open the
housing.
Refer any service or repair operation not described in this manual to an
authorized RUSH by Martin™ service technician. Do not try to carry out such
an operation yourself, as doing so may present a health or safety risk. It may
also cause damage or malfunction, and it may void your product warranty.
Installation, on-site service and maintenance can be provided worldwide by
the Martin Professional Global Service organization and its approved agents,
giving owners access to Martin’s expertise and product knowledge in a
partnership that will ensure the highest level of performance throughout the
product’s lifetime. Please contact your RUSH by Martin supplier for details.
