RUSH PAR 2 CT Zoom™ User Manual
17
To set the fixture’s dimming curve:
1. Select DIMMER and press ENTER. The currently set mode will blink in
the display.
2. Use the DOWN and UP buttons to select MODE 1, MODE 2, MODE 3,
or MODE 4.
3. Once the mode has been selected, press ENTER to set it (or press
MENU to exit without making a change).
Blackout or Hold if DMX signal stops
You can decide how the fixture should behave if you are controlling the
fixture via DMX and you stop sending the DMX signal.
1. Select BLACKOUT and press ENTER. The currently set blackout mode
will blink in the display.
2. Using the DOWN and UP buttons, select YES or HOLD to decide how
the fixture should respond if it stops receiving a DMX signal:
-
If you select YES, the fixture will black out
-
If you select HOLD, the fixture will continue to show the effect that it
is displaying at the time.
3. Press ENTER to confirm your choice (or press MENU to exit without
making a change).
Display panel backlight sleep mode
To set the display panel backlight to remain on all the time or to automatically
sleep when the control panel is not in use:
1. Select BACKLIGHT and press ENTER.
2. Use the DOWN and UP buttons to select ON (display backlight
constantly on) or OFF (display backlight sleeps after a short period with
no activity). Press ENTER to confirm (or press MENU to exit without
making a change).
Dimmer speed
Dimmer speed provides two options:
•
SNAP sets the dimmer to exactly follow changes in dimming level sent
from the controller. This gives the fastest dimmer response.
•
FADE adds a one-second (approx.) smooth fade to all changes in
dimming level sent from the controller. This gives the smoothest dimmer
response.
To set the dimmer speed:
1. Select DIMMER SPEED and press ENTER to confirm.
