26
RUSH Multibeam 2 User Manual
Troubleshooting
This section describes a few common problems that may occur during
operation and provides some suggestions for easy troubleshooting:
Symptom
Potential cause
Remedies
No light from fixture
or fans not working.
Power supply issue,
such as blown fuse,
faulty connector or
damaged cable.
Check whether fixture’s
power indicator LED is lit.
Check all power
connections and cables.
Replace fixture’s primary
fuse.
Fixture does not
react to music beat.
Sound activation
disabled.
Sound level too low to
activate music trigger.
Ensure that fixture is not
connected to a DMX signal.
Check master/slave
settings
Tap the microphone to
ensure that it is functioning.
The fixture should react
when in Music trig mode.
Place fixture and music
source closer together.
One of the control
channels is
unresponsive or only
responds
intermittently.
DMX setup or DMX link
fault.
Damaged step motor or
cable connection
between LED bars and
body.
See next section.
Contact your RUSH by
Martin authorized
distributor for assistance.
Summary of Contents for Multibeam 2
Page 1: ...Multibeam 2 User Manual Professional Entertainment Technology...
Page 31: ......
Page 32: ...Innovation Quality Performance...