Rush Multibeam 2, User Manual

Page: 17 / 32

RUSH Multibeam 2 User Manual 17
2. Use the DOWN and UP buttons to select Yes (blackout if no DMX) or No
(run stand-alone show if no DMX).
3. Press the ENTER button to confirm (or, to return to the higher level of the
menu structure without any change, press the MENU button).
Show mode (Auto trig)
Show mode provides 12 preprogrammed stand-alone shows.
To set a fixture’s show mode:
1. Set BLACKOUT to No (see above).
2. Select SHOW MODE and press the ENTER button to confirm.
3. Use the DOWN and UP buttons to select Show 0 (random show) or Show
1 to Show 12 (preprogrammed shows).
4. Once the show has been selected, press the ENTER button to set (or, to
return to the higher level of the menu structure without any change press
the MENU button).
Sound state (Music trig)
The fixture has a built-in microphone that allows its show to be triggered by a
music beat, for example.
To turn on Music trig:
1. Set BLACKOUT to No (see above).
2. Select SOUND STATE
and press the ENTER button to confirm.
3. Use the DOWN and UP buttons to select
On
(Music trig on) or
Off
(Music
trig off).
4. Press the ENTER button to set it (or, to return to the higher level of the
menu structure without any change press the MENU button).
Automatically turn off display backlight
The display backlighting remains on permanently by default when power is
applied to the fixture. If you prefer, you can enable Sleep mode, where the
backlighting goes off automatically when the buttons and menus have not
been used for a short period:
1. Select BACKLIGHT and press the ENTER button to confirm.
2. Use the DOWN and UP buttons to select LED Off (Sleep mode disabled)
or LED On (Sleep mode enabled) and press the ENTER button to confirm.
3. Press the ENTER button to confirm (or, to return to the higher level of the
menu structure without any change press the MENU button).