Rush Multibeam 2, User Manual

Page: 18 / 32

18 RUSH Multibeam 2 User Manual
Fixture settings
Tilt can be inverted and the LED activation sequence can be reversed on one
or both LED bars. These options can be used to create symmetrical effects.
Tilt inverse 1
To adjust the LED Bar 1 tilt settings:
1. Select
TILT 1 INVERSE and press the ENTER button to confirm.
2. Use the DOWN and UP buttons to select Yes (movable LED bar 1
inversion) or No (normal).
3. Press the ENTER button to confirm (or, to return to the higher level of the
menu structure without any change press the MENU button).
Tilt inverse 2
To adjust the LED Bar 2 tilt settings:
1. Select
TILT 2 INVERSE and press the ENTER button to confirm.
2. Use the DOWN and UP buttons to select Yes (movable LED bar 2
inversion) or No (normal).
3. Press the ENTER button to confirm (or, to return to the higher level of the
menu structure without any change press the MENU button).
LED reverse
To adjust the LED sequence reversal settings.
1. Select REVERSE and press the ENTER button to confirm.
6. Use the DOWN and UP buttons to select the Yes (LED sequence left to
right) or No (normal, LED sequence from right to left). Press the ENTER
button to set it (or, to return to a higher level of the menu structure without
any change press the MENU button).
Fixture test
Automatic tests of all functions can be run from the control menus.
Auto test
To perform a complete test of all of the fixture functions:
1. Select AUTO TEST
and press the ENTER button to confirm. The fixture
will run the auto test routine.
7. To return to the higher level of the menu structure without any change
press the MENU button.