Rush Multibeam 2, User Manual

Page: 19 / 32

RUSH Multibeam 2 User Manual 19
Fixture information
Fixture temperature readout
To check the onboard temperature of the fixture:
1. Select TEMP and press ENTER. The display will show the temperature of
the unit.
2. To return to a higher level of the menu structure, press MENU.
Fixture operating hours counter
To see how many hours the fixture has been used:
1. Select FIXTURE HOURS
and press the ENTER button to confirm. The
number of hours will be shown.
8. To return to the higher level of the menu structure without any change
press the MENU button.
Software version
To see what software version is installed in the fixture:
1. Select SOFTWARE VERSION
and press the ENTER button to confirm.
The firmware version will be shown.
2. To return to the higher level of the menu structure without any change
press the MENU button.
Reset functions and settings
1. Select RESET and press the ENTER button to confirm. The fixture will
reset the fixture.
2. To return to the higher level of the menu structure without any change
press the MENU button.
Effects
This section describes DMX-controllable effects that require particular
explanation. See DMX protocol starting on page 23 for a full list of the DMX
channels and values required to control the different effects.
Tilt movement
Each of the two moveable LED bars can be tilted from 50° to 170°
independently.