RUSH DC1 Aqua User Manual
30
Troubleshooting
This section describes possible problems and provides some suggestions for
easy troubleshooting:
Symptom
Potential cause
Remedies
No light from fixture,
or fans not working.
Power supply issue,
such as blown fuse,
faulty connector or
damaged cable.
Check all power
connections and cables.
Replace fixture fuse.
Fixture does not
respond to DMX
control.
Incorrect DMX
addressing.
Fault on DMX link due to
damaged connector or
cable, or interference
from proximity to a high-
voltage installation.
Ensure that fixture’s DMX
address matches address
set on DMX control device.
Check that fixture’s DMX
indicator LED is on, and if
not, check all cables and
connections on the DMX
link.
Check that DMX link is
terminated.
Check that all devices on
the DMX link use standard
DMX polarity.
Try to control the fixture
with another DMX control
device.
Move or shield link if it is
close to an unshielded
high-voltage installation.
Problems running
master/slave
operation.
Fixtures incorrectly set
up.
Fixtures receiving DMX
signal.
Check fixture settings.
Shut down DMX to fixtures.
