Main Support no.: +370 5 2045030
Polish Support no.: +48 22 2092532
Ukrainian Support no.: +380 947 107319
26
www.ruptela.com
Authorized numbers
Set a
Password
to restrict access to the SMS commands feature.
SMS Alert Number
–
when a specific IO parameter is triggered,
the FM device will send an alert message to this number.
In the
Valid Numbers
table enter specific numbers that will be
able to send SMS commands to the device.
The
Enable configuration over SMS
checkbox controls
configuration over the SMS feature. The full functionality
description can be found on our documentation
If
Use ID in SMS commands
is enabled, an ID tag must be
added to each SMS command. The same ID will be returned in
SMS responses, showing to which command the device replied.
More information is available in the
Note
If
Use ID in SMS commands
is enabled, SMS commands sent
without an ID will not be processed.
Eco-Drive
options are used to configure the Eco-Drive functionality. It rates drivers according to how
safe they drive or their behavior. The full functionality description can be found on our documentation
Authorized IDs
allows you to fill in a list of authorized IDs which can start the engine when ignition
blocking is used. More information about this functionality is available on our documentation website:
Eco4 Pro4 Tco4 + Driver registration
Movement sensor sensitivity
allows you to configure the sensitivity of the movement sensor according
to your needs. If you slide the bar towards
Max
, the sensor will detect even the slightest movements. If
you slide it to
Min
, only strong movements will be detected.
