Main Support no.: +370 5 2045030
Polish Support no.: +48 22 2092532
Ukrainian Support no.: +380 947 107319
13
www.ruptela.com
5
Device preparation (IP67 housing)
In order for the device to work you have to configure it and insert a SIM card. To do so, you have to
open the device housing and perform certain actions described below.
5.1
Opening the device
First of all,
you have to unscrew six “+” shaped
screws on the
bottom of device to access the internal components.
Note
It is recommended to keep the number of opening
procedures to the minimum.
5.2
Connecting the USB cable
Connect the USB cable to the device (1). The cable will plug in
only in one way, be careful not to damage the plug. Connect
the other end to your PC or laptop.
5.3
Inserting a SIM card
If you received a device without a SIM card, place your own
SIM card into the device using the SIM card slot (2). Make sure
the microchip is facing down.
5.4
Cables
GNSS antenna (FM-Eco4+ E S only) and 12 Pin cables are connected already, and you do not need to
reconnect them. The configuration can be done without an external power supply
–
the device can be
powered for configuration via USB.
