Operation
56
Runco X-200i Series Installation/Operation Manual
PRE
L
IMINAR
Y
Memory:
Select Memory from the Main menu, then press
ENTER
to recall image quality
settings previously saved, or to save changed settings in any of four memory locations.
• Recall Memory:
Select Recall Memory from the Memory menu to recall saved image
quality settings. Unless you select
Default
(see below), this control affects all sources,
not just the active source.
•
Custom 1
and
Custom 2
contain the factory default settings when the projector is
initially turned on.
• When you recall the
I
S
F Day
or
I
S
F Night
memory settings, all settings associated
with these stored values are grayed out. This prevents unintended adjustments from
being made. To remove this restriction, choose
Custom 1
or
Custom 2
.
I
S
F Day
and
I
S
F Night
are grayed out unless these custom settings have already
been saved.
• Choose
Default
to restore the factory-default settings for the active source only.
The other sources are unaffected.
•
S
ave Memory:
Select Save Memory from the Memory menu to save any
image-related settings you have changed to
Custom 1
or
Custom 2
.
The following items are saved (for
all
sources, not just the active source):
• Brightness / Contrast
• Color / Tint
• Sharpness
• Noise Reduction
• Color Space
• Gamma
• Color Temperature
• DLP Frame Rate
• Color Gamut (including PCE settings)
• SatCo
• Adaptive Contrast
• RGB Adjust (all settings in sub-menu)
• 3D Mode
•
S
ave I
S
F:
Select Save ISF from the Memory menu to save any image-related settings
you have changed to the
I
S
F Day
or
I
S
F Night
memory location.
The settings that are saved are the same as those saved with the
Save Memory
command (see above).
You must enter a passcode to access the Save ISF
sub-menu.
Note
