Runco LightStyle LS-12d, Installation & Operation Manual

Page: 97 / 152

Operation
LightStyle™ LS-12d Installation/Operation Manual 81
PRE
L
IMINAR
Y
• S pla s h Enable: When you have finished customizing the splash screen, select Splash
Enable from the Splash Configure menu. Then, select On and press ENTER .
O S D Po s ition: To adjust the position of the OSD, select OSD Position from the
Calibration menu and press ENTER .
Press or to select “Hor.” or “Ver.” Then, press or to change the position.
Service Use the Service menu to access advanced projector configuration settings. Thi s menu
s hould be u s ed by I S F-certified technician s only.
Te s t Video: Select Test Video from the Service Menu to access the internal test patterns
on the Dimension Digital Controller. Table 4-4 lists the available test patterns and
describes their suggested usage.
S ervice
Test Video
Input Names
Remote Control
Display Device
Network
Color Space
Triggers
Miscellaneous
HDMI
Front Panel Brightness
Auto Power Off
Standby Mode
System Reset
You must enter a passcode to access the Service menu.
Table 4-4. Te s t Pattern s and Their S ugge s ted U s age
Pattern S ugge s ted U s age
Color Bar s 1
Use this pattern when making
color saturation and tint
adjustments.
Color Bar s 2
Use this pattern when making
color saturation and tint
adjustments.
Focu s
Use this pattern when adjusting
the focus.
Note