rulmeca RDR BL3, Technical Manual

Page: 40 / 40

TECHNICAL MANUAL FOR THE RDR BL3 - V1.1 DRIVE ROLLER Rev. 21/09/2018 page 40
19 DATA REQUEST FORM FOR DRIVE ROLLERS APPLICATION
Before requesting or placing an order for Drive Rollers or, still better, before designing the conveyor comprising
the Drive Rollers, please gather the following data and send them to Rulmeca so that the application can be
examined and approved. This measure enables incorrect applications or problems to be avoided when the
conveyor is started up.
Customer: __________________________ Reference : __________________________
Telephone : __________________________ Email : _______________________________
Commercial ref: ___________________ Agency : ______________________________
Data on roller conveyor
Conveyor length [m]: _________ EL distance of roller support profiles [mm]: __________ Speed [m/s]: ________
Roller pitch [mm]: ________ Loading: Ascent

Descent

Level;

Inclined roller conveyor [mm, degrees o %]: ___________

Direction reversal requested; Impact of load on rollers: max [kg]: __________ (describe) ______________________
Pressure applied to the package [kg]: _________ (describe) _____________________________________________
Number of hours of service per day: ________Number of days per week: ________Operating cycle:

Continuous

Intermittent
Time on/off [sec]: ___________ / ___________ Number of Starts-Stops/Minute: _____________________________

Accumulation Packages to be accumulated: _____________________Maximum length of accumulation
area[m]:______________
Notes:
……………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………
Conveyor belt specifications
Belt width [mm]: _________ distance between drums [mm]: _________ EL distance of roller support profiles [mm]: ___________
Web brand and model: ______________________ Belt elongation elasticity coeff.: ___________ N/mm in width
Web friction coeff./sliding plane: _____________ Belt speed [m/s]: _____________
Notes: …………………………………………………………………….………………………………………………………………………
……………………………………………………………………………………………………………………………………………………
Details of package or material to be conveyed
Dimensions of package max / min (length x depth x h) [mm]: ______ Forward conveying front:

L

d _______ [mm]
Max / min package weight [kg]: ________________________ Total load on roller conveyor or belt [kg]: ________________
Type of material in contact with the rollers:

Plastic

Cardboard

Wood

Other, specify:
_______________________
Finish of material in contact with the rollers:

Stiff,

Soft,

Smooth,

Rough,

Flexible

Heat shrink packaging
Notes:………………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………………………….
Environmental details
Max / min ambient temperature [°C] __________ / ___________
Environment:

Dry,

Damp,

Wet,

Corrosive,

Washes,

Detergents,

High pressure,

Steam
Conveyed material

Dry,

Damp,

Wet,

Abrasive,

Other
Notes:…………………………………………………………………………………………………………………………………………..
…………………………………………………………………………………………………………………………………………………
Additional functional considerations
Notes: …………………………………………………………………………………………………………………………………………..
………………………………………………………………………………………………………………………………………………….
If possible, please enclose a technical drawing of the system to be installed.