Hardware Installation and Reference Guide
Overview
Hot-plugging
Not supported
Module Cables
Cat-5 8-core UTP cables with RJ-45 connector are used.
NMX-1POS-STM1H
NMX module:1-port POS module (NMX-1POS-STM1H)
Appearance and Indicators
Appearance of 1-port POS module (NMX-1POS-STM1H)
This module has the status indicator for POS port and the sub-card Ready indicators. Each POS port has two status
indicators: Link and Alarm.
Link: ON means the link is set up, OFF not connected.
Alarm: OFF means the communication is normal, ON faulty.
RDY: ON means the sub-card is powered on and initialized.
Module Attributes
The POS module provides POS interface and the standard 155 M SDH interface. Its SFP port can connect with
multi-mode or single-mode optical parts.
The attributes of POS module are as follows:
Interface
One POS
Interface standard
ITU-T G.707
Port rate
155 Mbps
Protocols supported
HDLC, PPP
Interface Attributes
The interface attributes of the POS module are as follows:
Interface type
SFP/LC
Interface standard
SDH STM-1
