·
For the slot location of the supervisor module and service module, please see figure 4-12.
Figure 4-12 Slot location
Note:
①
Supervisor module slot
②
Service module slot
Install modules
The supervisor module and service module adopt the design of self-locking lever. See figure 4-13 for operation.
(1) Lever Operation
Figure 4-13 Pulling out Lever
(2) Module Installation
1)
Pull out both levers (
①
in figure 4-14
).
2)
Insert the module into the slot along the rail and drive it ahead smoothly (
②
in figure 4-14
).
3)
Push both levers toward the slot (
③
in figure 4-14
).
4)
Tighten captive screws on both sides of the panel (
④
in figure 4-14
).
Figure 4-14 RG-S7808C in Chassis
