·
It is recommended to have three people carry or lift the switch. One is responsible for directing and the other two carrying or lifting
the switch.
Installation Steps
Measure the cabinet height and locate the position on the bracket for installing the slide rail. Then locate the position on the other
bracket through the carrying
plane and mark the locations. Install
seven cage nuts on the marked square holes on each bracket as
shown in figure 4-7.
Figure 4-7 Slide Rail Installation Position
Place the switch on the slide rail, and drive it smoothly into the cabinet until the front bracket reaches the square hole strip.
Align the installation holes on the bracket with the cage nuts on the square hole strip, and mount them with screws.
Figure 4-8 Mounting Switch into Cabinet
