RDLC320 Controller User Manual
28 / 45
© 2016 Ruida Technology. All Rights Reserved.
information of no file, otherwise it will show the numbers and names of all object
files (the suffix name of object file is .rd). The processing times corresponding to this
file is shown after the file name in the “Memory File” interface. Each page has four
files:
Select a certain file by pressing the directional keys (move the cursor with the up
and down keys and turn pages with the left and right keys) first, and then press the
“Enter” key to enter the submenu. For memory file, it supports such six items as
“Copy to USB”, “Run”, “Deletion”, ”Work Time Preview”, “Track Frame” and
“Clear File Number”.
On pressing the “Enter” key when you select the “Run” item, directly start the
processing of this file and the interface shows the same as Figure 8.1-3 (Running
Interface); selecting “To USB” and pressing the “Enter” key, this memory file will be
copied to USB disk. If copying fails, the interface will show the error information; if
copying succeeds, the system will return to the prior interface after the bell rings. On
selecting the “Deletion” and pressing the “Enter” key, this file in the memory will be
deleted. Selecting the “Work Time Preview” and pressing the “Enter” key, to start the
work time preview feature of the certain file. If “Track Frame” is selected, the frame
of the graph is previewed. Then if “Clear File Number” is selected, the work number
of the certain file is set to zero.
For USB files, it supports such two options as “Copy to Memory” and “Deletion”,
the operation of which is similar to that of memory file. In the operation of file
copying, if the interface shows the error information, please press the “Enter” key or
“Esc” key and the interface will return to the prior one.
This system supports such file formats of USB as FAT32 and FAT16,
but it can identify them when the files are put under the root directory
of USB. The file name of more than 8 characters will automatically
be cut out by the system. The file name that has only English letters
and digits will not show when they are copied to the controller. The
files copied from the controller to USB will be placed under the root
directory of USB.
Figure: 8.2-7
Prompt
