RDLC320 Controller User Manual
27 / 45
© 2016 Ruida Technology. All Rights Reserved.
Brief the following items separately:
◆
“Memory File”: the related operations on the memory file such as processing,
bordering, copying, deletion and etc.
◆
“USB File”: the operations on USB file, such as copy to memory and deletion.
◆
”Work Time Preview”: press this entry, the work time of the currently selected
file will be calculated (you can also lower the memory file on the menu to start the
work time preview feature of a certain file), calculated time according to the file size
and complexity of the graphics, in general, if the actual work time is several hours,
then the calculated time may require ten seconds or even more. The work time
calculated is consistent with the actual working hours, accurate to the millisecond.
◆
“Delete All Memory Files”: to delete the data of all memory files on the
controller.
◆
“Format Memory”: to format the memory on the controller. There are “Quick
Format” and “Complete Format” for option. If there is some abnormity in memory,
you may check the invalid block with the format function.
◆
“Clear All File Number”: to delete the corresponding processing times to each
memory file.
◆
“Total File Number”: to show the present total times of processing by the
machine.
◆
“Clear Total File Number”: to clear and recalculate the total file number.
Move the cursor by way of the up and down directional keys to select an item
first, and then press the “Enter” key to enter the submenu. On selecting “Memory
File” or “USB File”, if the by visitor has no files, the interface will show the
Memory File
USB File
Work Time Preview
Delete All Memory Files
Figure: 8.2-5
Format Memory
Clear All File Number
Total File Number
：
XXXXX
Clear Total File Number
Figure: 8.2-6