Cutting machine SR 1 / SR 1 Turbo
5
Start the machine. – Open knife protection box 20 mm
wide. – If the machine does not switched off, it must be
shut down immediately!
Start the machine. – Open the slider of the funnel 20 mm
wide. – If the machine does not switched off, it must be
shut down immediately!
!!! To shut down the machine the main switch must be turned to “0” -
OFF" and the power plug pulled from the outlet! The machine must be
secured against further use!
!!! The supervisor must arrange for the repair of the non-functional
safety device by a Rühle service technician. Until the corresponding
parts have been repaired, the supervisor must ensure that the
machine or parts of the machine are under no circumstances put into
operation!
!!! The cleaning personnel must observe the work procedures from the
“Cleaning” work instructions prepared by the supervisor.
!!! The maintenance personnel may only carry out work specified as
“Regular care”, unless any other authorisation has been issued in
writing by the manufacturer of the machine. The maintenance
personnel must observe the work procedures from the “Maintenance”
work instructions prepared by the supervisor.
The power plug must be disconnected for maintenance work!
!!! The machine may not be modified.
!!! Only Rühle spare parts and accessories may be used.
!!! The operating instructions as well as all other technical documents
included must be supplied completely when reselling the machine.
