Cutting machine SR 1 / SR 1 Turbo
4
e)
Provide personal protective equipment!
All life cycles phases:
Wear foot protection!
Wear hand protection!
Wear protective clothing!
Cleaning; care / maintenance; dismantling:
Wear eye protection!
Use light breathing mask!
!!! The operator must operate the machine according to the intended
use and strictly observe all points listed in the “Operation” work
instructions prepared by the supervisor.
!!! Before putting the machine into operation for the first time and on
each working day, the operator must check the functionality of the
following safety devices:
a)
Visual check for changes or damages on all machine sides
and accessible machine parts, e.g. the cut-off knife. The
machine must be shut down in the event of any damages or
changes!
b)
Check the safety switches as follows:
Install a protective guard in the knife protection box, insert
the grate frame, close the knife protection box, insert the
slider and close the funnel with it.
Start the machine. – Turn the main switch to “0 – Off”. – If
the machine does not switched off, it must be shut down
immediately!
