RuggedCom WiN51 Series, User Manual & Installation Manual

Page: 51 / 61

WiN5200 Management | 51
6.4 SNMP Management
There are two MIB types available in the CPE:
•
the standard MIB II (RFC 1213)
•
the private MIB
Table 6-4 describes the CPE Managed Parameters.
Table 6-4: Subscriber Station Parameters
Parameter Description MIB Type Remarks
Location site
+ Contact details
MIB II
Cell ID Activity
(Connected/Disconnected),
Speed (10/100/1000), Duplex
(Full/Half), IP Address,
Private
Data Interface
Status
MIB II
Temperature temperature inside the case Private
Software Version all Modules software’s versions Private
Uptime on time from power up Private
Number of
registered SU
Private
SU MAC
Addresses
Private
SU Type Private
Radio Status Transmit: On/Off
Frequency: configured radio
frequency
Configured BW/FFT
Transmit power
Private
TX Counter Number of transmit packets Private
RX Counter Number of receive packets Private