RuggedCom WiN51 Series, User Manual & Installation Manual

Page: 46 / 61

WiN5200 Management | 46
6.1 General
The CPEs can be monitored and controlled with a standalone PC or through a management
system (WiNMS) using the backhaul interface. The monitoring and control capabilities are
similar in both cases but the interface may appear different. This section will detail all the
monitoring and control capabilities and then will specify which of them are available through
each type of interface.
The local PC can connect to the internal WEB server using HTTP.
The CPEs have a standard MIB II and propriety MIB.
Management of the CPE device shall use SNMP.
All levels of management are secured by passwords.
There are no local displays on the CPEs. All the indications will have to be monitored via the
management system (WiNMS).
6.2 SW Download/Upgrade
Software can be loaded into the CPE in several ways:
• Using a local PC (connected to the nearby switch)
•
Remotely using SNMP (over the backhaul interface)
•
Remotely using FTP
The CPE supports a complete rollback option in case the upgrade does not work.