RuggedCom WiN51 Series, User Manual & Installation Manual

Page: 35 / 61

WiN5200 Installation Procedure | 35
4.4 Cable Connections
4.4.1 Installing the WiN1010 data adapter for WiN5200
The WiN 1010 data adapter is used to power the WiN 5200 and to distribute data.
The WiN1010 data adapter is a combined data and power adapter that interfaces to the
customer’s Outdoor Unit wireless device. The WiN1010 data adapter unit provides RJ-45
input connectors that include 10/100Base-T transformers for connection to an IEEE802.3
(10/100Base-T) compatible device. The unit receives power from 100V to 240V AC using an
IEC-320-C14 industry standard connector.
Important
The power supply AC cord should be 3 wires, 18 AWG minimum, with length less than 4.5
m, safety certified according to national rules
A single output RJ-45 connector provides 10/100 Base-T data and power to the outdoor unit
over a Cat 5e cable. This cable serves the bi-directional transfer of data and signaling as well
as a power feed to the outdoor equipment.
Note
The Cat5e Ethernet cable is not included. Please refer to "Appendix B – IDU to ODU cable specification"
for detailed technical specifications.
The connection schema below illustrates the connections between the devices.
Figure 4-4: WiN5200 Interconnection Schema
Connect the WiN 5200 to WiN 1010 Data Adapter
Connect over a Cat 5e cable the Ethernet port of the WiN5200 to the "ODU IF" port of the
WiN 1010.