2. Introduction
RuggedMAX™
12
Installation Guide Rev 1.0
2.2. Capabilities and Features
• All-outdoor, one-box base station solution.
• GPS synchronization.
• MIMO (2×2) support.
• Non-Line-of-Sight (NLOS).
• Small footprint and light weight enables simple installation and deployment by a single person.
• IEEE802.16e Wave2 Standard Compliance.
• Backbone Ethernet connectivity via a 10/100 Base-T network interface.
• Fixed and mobile CPE support.
• 3.5 MHz, 5MHz, 7MHz and 10MHz channel bandwidth support.
• Different RF options including 2.x, 3.x GHz band support.
• Traffic classification and connection establishment initiation.
• Policy-based data switching.
• Quality of Service (QoS) management.
• Alarms management.
• An SNMP agent incorporated into the unit enables extensive In-Band (IB) management of the
base station and all its registered CPEs.
• An R6 interface to ASN-GW profile C.
2.3. System Architecture
The WiN7200 Small Form Factor Base Station unit receives power and data over PoE.
Figure 2.2. Power Over Ethernet Block Diagram
